The SGM3760 and SGM3760A are 2-channel screen flash white LED drivers with high efficiency boost regulator. With an internal 40V/3.6A power MOSFET, they are well suited for smart phone backlight applications powered by 1-cell Li-Ion battery. The supply voltage operates from 2.7V to 5.5V. The boost output has an adaptive voltage regulation with enough low headroom voltage. The SGM3760/A are capable of driving up to 10S2P white LEDs while achieving high efficiency. The SGM3760/A are designed for smart phone image capture using display device as a screen flash mode light source, as they are capable of driving up to 80mA/60mA current per channel at 32V for 330ms when the strobe signal is active. The backlight mode default white LED current is programmed by an external RISET resistor. During the operation, the LED current can be controlled by applying a PWM signal to the PWM pin. When the device is in operation and the STRB pin is pulled up, the SGM3760/A will enter flash mode within 50μs. The output current is regulated to 4× for SGM3760 and 3× for SGM3760A of the backlight mode voltage that is determined by the PWM signal duty cycle. When the STRB pin is pulled down or the strobe signal remains high for longer than the 330ms timer, the SGM3760/A will enter backlight mode within 50μs. The SGM3760/A includes various protections such as built-in soft-start, over-voltage protection, over-current protection, and thermal shutdown. The SGM3760/A are available in a Green WLCSP -1.32×1.32-9B package and operate over the -40℃ to +85℃ temperature range.